HDMI 6 X 2 , 4K X 2K , 3D Matrix
INTRODUCTION
HDMI Matrix is a perfect matrix product with detached external
audio output ports, which can connect 6 different HDMI signal
sources and 2 displays. It can easily switch any of 6 input signals
to 2 displays by using remote control or pushing button. The output
signals can be same or different. By using this product can avoid
the need to disconnect and reconnect signal sources to displays
frequently. It can smartly select input signal sources with
priority order and jump over those input signal sources which are
not in work. It can optimize your home theatre system to the best
effect.
TECHNICAL PARAMETERS
| HDMI Source Input Port | 6 |
| Display Device Output Port | 2 |
| Source Port Connector | HDMI 19PIN |
| Display Device Port Connector | HDMI 19PIN |
| HDCP Compliant | YES |
| Single Link Range | 3840x2160 |
| Input DDC Signal | 5 Volts P-P(TTL) |
| Input Video Signal | 0.5-1.0 Volts P-P |
| Deep Color | 36bit |
| HDMI Version | HDMI1.4 |
| Signal Speed | Up to 10.2Gbps |
| Bandwidth | Up to 340Mhz |
| The length of input cable | PS3≤15M；BLUE DVD≤15M |
| The length of output cable | ≤25M |
| The cable standard | 26AWG HDMI1.4 |
| Vertical Frequency Range | 30Hz |
| Power Consumption(max.) | 6.5Watts |
| Operation Temperature | 0℃-70℃ |
| Power Adaptor | 5V 2A |
| Working Voltage | DC 5V |
| Net Weight | 0.8kg |
| Dimension: L*W*H(mm) | 276*110*25 |
FEATURES
1. When its 6 input ports are separately connected to 6 signal
sources
with HDMI cables, the HDMI Matrix automatically recognizes the last
connected port and switches its input signal to 2 displays.
2. Support HDMI 1.4,HDCP1.4;
3. The needed input signal sources must be selected by using remote
control or pushing button in order to make 2 displays showing 2
different
signals.
4. Support high resolutions up to 4Kx2K, including 480i/p, 576i/p,
720i/p, 1080i and 1080p,3840x2160@25/30Hz.
5. LED indicates signal /power mode.
6. Use remote control or push button to freely select input source.
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the
signal input(s), output(s) and power requirements.
Audio Select ------------------------------------Audio output
select
OUT B -----------------------------------------------------Out B
select
IR Signal -----------------------------------Remote control
receiver
OUT A ------------------------------------------------------Out A
select
LED ---------------------------------------------------ARC Status
LED
ARC ----------------------------------------------------------ARC
select
Power ------------------------------------------------------Power
status
Reset -------------------------------------------------------Reset
button
ON/OFF ---------------------------------------------------Power
button
HDMI INPUT1-6-----------------------------------HDMI Input ports
HDMI OUTPUT A-B ---------------------------HDMI Output Ports
Stereo ------------------------------------------ Analog audio
output
Coaxial --------------------------------Coaxial Digital audio
output
Toslink ----------------------------------Toslink Digital audio
output
DC/5V--------------------------------------------DC Power input
port
CONNECTION DIAGRAM
Before installation, please make sure all devices you wish to
connect have been turned off.
1. Connect the HDMI from source(DVD, HD Player,PC) to matrix.(Input
cables are optional).
2. Connect the HDMI output from to the TV which has HDMI input.
3. Insert the DC side of 5V power supply into and then connect the
AC
side of the power supply into the wall outlet.
4. Power on the source and TV, choose the input of TV to its HDMI
channel.
5. The image does not need to be adjusted, the matrix will position
it
automatically, the user may adjust the horizontal position under
some extreme condition.
6. Select the working mode of the matrix via the remote control or
panel button.
