HDMI 2 x 2 , 3D 4K x 2K , Matrix
INTRODUCTION
HDMI Matrix is a perfect matrix product with detached external
audio output ports, which can connect 2 different HDMI signal
sources and 2 displays. It can easily switch any of 2 input signals
to 2 displays by using remote control or pushing button. The output
signals can be same or different. By using this product can avoid
the need to disconnect and reconnect signal sources to displays
frequently. It can smartly select input signal sources with
priority order and jump over those input signal sources which are
not in work. It can optimize your home theatre system to the best
effect.
TECHNICAL PARAMETERS
| Display Device Output Port | 2 |
| HDMI Source Input Port | 2 |
| Display Device Port Connector | HDMI 19PIN |
| Source Port Connector | HDMI 19PIN |
| HDCP Compliant | YES |
| Single Link Range | 3840x2160 |
| Input Video Signal | 0.5-1.0 Volts P-P |
| Input DDC Signal | 5 Volts P-P(TTL) |
| Deep Color | 36bit |
| HDMI Version | HDMI1.4 |
| Signal Speed | Up to 10.2Gbps |
| Bandwidth | Up to 340Mhz |
| The length of input cable | PS3≤15M；BLUE DVD≤15M |
| The length of output cable | ≤25M |
| The cable standard | 26AWG HDMI1.4 |
| Power Consumption(max.) | 5Watts |
| Vertical Frequency Range | 30Hz |
| Operation Temperature | 0℃-70℃ |
| Power Adaptor | 5V 1A |
| Working Voltage | DC 5V |
| Dimension: L*W*H(mm) | 150x64x25 |
| Net Weight | 0.3Kg |
FEATURES
1. Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and
1080P 3D@60Hz
2. 3D video support including Frame packing for all 3D formats up to a
297MHz TMDS clock.
3. 3D HDMI 1.4a video format support.
4. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
5.Supports deep color up to 48-bit per pixel.
6. Supports the reception of any audio data conforming to the HDMI
specification 1.4 such ad L-PCM at up to 192kHz,compressed
audio(IEC 61937),DSD,DST,DTS and HBR
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the
signal input(s), output(s) and power requirements.
EDID -----------------------------------EDID selector button
IR ----------------------------------------------------IR receiver
B2~B1 ---------------------------------------Output B Status
OUT B Select ------------------------------Output B Select
A2~A1 ---------------------------------------Output A Status
OUT A Select ------------------------------Output A Select
Power -------------------------------------------Power Status
ON/OFF ----------------------------------------Power switch
DC/5V --------------------------------------------Power Input
HDMI Input1~2 --------------------------HDMI Input ports
HDMI Output A~B --------------------HDMI Output ports
SPDIF ---------------------------------Digital Audio Output
Stereo --------------------------------Analog Audio Output
CONNECTION DIAGRAM
Before installation, please make sure all devices you wish to
connect have been turned off.
1. Connect the HDMI from source(DVD, HD Player,PC) to matrix.(Input
cables are optional).
2. Connect the HDMI output from to the TV which has HDMI input.
3. Insert the DC side of 5V power supply into and then connect the
AC
side of the power supply into the wall outlet.
4. Power on the source and TV, choose the input of TV to its HDMI
channel.
5. The image does not need to be adjusted, the matrix will position
it
automatically, the user may adjust the horizontal position under
some extreme condition.
6. Select the working mode of the matrix via the remote control or
panel button.
