HDMI over Single cat5e/6 with IR , (100M), Full HD 1080P TCP/IP ,
Extender
Introduction
The HDMI Extender over ONE CAT5e/6 is a tool for extending your
HDMI signal over long distances to a compatible display. Instead of
using expensive HDMI cables, your existing CAT 5e/6 cables/sockets
can be utilized to perform advanced functions like transferring
Deep Color (12 bits/color) video and digital audio, with a
bandwidth up to 225MHz. The HDMI Transmitter and Receiver, over ONE
CAT 5e/6 extender is your substantial HDMI extender tool. The HDMI
Extender also support IR re-transmitting, so you can control the
Source which is 100 meters outside using the HDMI Extender.
Specifications
| Frequency Bandwidth | 2.25Gbps (single link) |
| HDMI Transmitter Input/ Output Ports | 1x HDMI Female port/1 x CAT6 |
| HDMI Receiver Input/ Output Ports | 1 x HDMI Female port/1 x CAT6 |
| Power Supply | DC 5V |
| ESD Protection Human Body Model: | ± 8kV (air-gap discharge) ± 4kV (contact discharge) |
| Dimensions (mm) | 65(W) X 100 (D) X 25 (H) |
| Operating Temperature | 0˚C ~ 40˚C / 32˚F ~ 104˚F |
| Storage Temperature | -20˚C ~ 60˚C / -4˚F ~ 140˚F |
| Relative Humidity | 20~90% RH (non-condensing) |
Features
1. DC 5V power supply;
2. HDMI 1.3, HDCP 1.1 and DVI 1.1 compliant;
3. Support Deep Color up to 12 bits/color;
4. Support 20~60KHz IR re-transmitting;
5. Uses one CAT5e/6 cable for data/DDC transmission;
6. Equalizes and recovers incoming TMDS data before retransmitting
it in optimal quality regardless of the incoming signal quality;
7. Cable testing showed that with 1080p resolution the HDMI input
source can be 10 meters away;
8. When transmitting a signal in 1080p resolution the CAT6
operating distance is 100 meters(max).
Operation controls and Functions
HDMI Extender Transmitter
1. Power:Plug the 5V power supply into the unit and connect the
adaptor to AC wall outlet.
2. RESET: Factory reset button. When the Receiver system functions
have been changed, Pressing this
button for 10 seconds can realize factory reset.
3. IR OUT:Remote control signal transmit,connect the IR transmit
cable with HDMI Extender Transmitter．The IR transmit cable face to
the IR receiver of the Source．
4. HDMI:HDMI Input port.
5. CAT6 OUT: Connect the CAT 5e/6 output of the Transmitter with
the CAT 5E/6 input of the HDMI over single CAT6 receiver.
6. LED indicator: When the DC power on, the indicator will be
light.
HDMI Extender Receiver
1. Power: Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet.
2. RESET: Factory reset button. When the Receiver system functions
have been changed, Pressing this
Button for 10seconds can realize factory reset.
3. IR IN: Remote control signal Receive,connect the IR receive
cable with HDMI Extender Receiver．
4. HDMI Out: HDMI output port.
5. CAT6 IN: Connect the CAT6 in of the receiver with the CAT6 input
of the HDMI over single CAT6 transmitter.
6. LED indicator: When the DC power on, the indicator will be light.
Application Example
1. Transmitter and Receiver one by one application.
